DELTA®-MS Tunnel LinerHigh capacity drainage with a continuous and safe system of channels.
DELTA®-MS Tunnel Liner is a sensible and reliable solution for coping with the influx of water in tunnel projects of any kind. Installed with its dimples facing outward, i.e. towards either the rock substrate of a shotcrete layer applied for stabilization and filtration purposes, the air gap between the dimples will form a continuous system of channels.
This continuous drainage space will convey any water coming from the ground towards the drainage system without impeding its flow. The inner waterproofing layer of the system, which may be attached directly to the dimpled sheet by any of a number of methods, is never impacted by water pressure. DELTA®-MS Tunnel Liner may serve as permanent shuttering, in structures made of waterproof concrete, keeping away any seepage water while the concrete sets.
| Material | Special High-Density PE |
|---|---|
| Dimple height | approx. 5/16" (8 mm) |
| Compressive strength | approx. 5200 psf (250 kN/m²) |
| Drainage capacity | approx. 12 gal/(min x ft) (149 l/(min x m)) |
| Air volume between dimples | approx. 0.13 gal/sqft (5.3 l/m²) |
| Service temperature range | -22 F to +176 F (-30 C to +80 C) |
| Fire resistance rating | Standard flammability as per DIN 4102 class B2; optional DIN 4102 class B1 for special requirements |
| Roll size | 6.5' x 65.5' (2m x 20m) |
Reference List Tunnel Projects
Remodeling Show
Sept. 9 - 12, 2008
Baltimore, MD, USA
Le Congres APCHQ
Sept 9 - 13, 2008
Tremblant, Quebec, Cananda
New York State Builders Assoc Show
Sept. 11 - 12, 2008
Albany, NY, USA
International Code Council Annual Conference
Sept. 14 - 20, 2008
Minneapolis, MN, USA